Justfor the Heckofit

A hand held tool or device, see if you can guess what it is.
User avatar
zelph
Posts: 15822
Joined: Tue Aug 14, 2007 1:53 pm

Justfor the Heckofit

Postby zelph » Fri Nov 30, 2007 2:28 pm

Here is one sent in by Survivor Dave. Just For The heck Of It :D

Image
http://www.woodgaz-stove.com/

User avatar
Survivor Dave
Posts: 34
Joined: Mon Oct 22, 2007 6:22 pm
Location: Roswell, Ga.
Contact:

Re: Just for the Heckof It

Postby Survivor Dave » Fri Nov 30, 2007 2:54 pm

Now Skids, since you know what it is, Zelph will only send you half of a stove! :D

SD

oops56
Posts: 1920
Joined: Wed Sep 19, 2007 11:31 am

Re: Justfor the Heckofit

Postby oops56 » Fri Nov 30, 2007 4:59 pm

Its a wrench for the safety valve on those primus and optimus fill caps
Man play with fire man get burnt

User avatar
Ridgerunner
Posts: 5275
Joined: Wed Sep 19, 2007 9:08 pm
Location: SW, Ohio
Contact:

Re: Justfor the Heckofit

Postby Ridgerunner » Fri Nov 30, 2007 7:20 pm

An Allen-Alan? head for removing brake caliphers. Can't tell the size. Could be uses for any Allen bolt of that size but I'm sure there is a specific Allen head that it goes to, ehh ;)
"Many of lifes failures are people who did not realize how close they were to success when they gave up".....Thomas Edison

"Live Life....Love Life....Ask More !

User avatar
Skidsteer
Posts: 555
Joined: Fri Aug 17, 2007 2:10 pm
Location: Leisure Acres

Re: Just for the Heckof It

Postby Skidsteer » Fri Nov 30, 2007 9:11 pm

Survivor Dave wrote:Now Skids, since you know what it is, Zelph will only send you half of a stove! :D

SD


Zelph makes half-stoves just to be fair to the competition.
Skids

Insanity: doing the same thing over and over again and expecting different results.
Albert Einstein, (attributed)
Image

heckdog
Posts: 40
Joined: Sun Nov 18, 2007 12:24 am

Re: Justfor the Heckofit

Postby heckdog » Fri Nov 30, 2007 11:05 pm

Looks like the tool I used to turn my garbage disposal when I clog it full of that godforsaken FOUL food product potted meat.

User avatar
Survivor Dave
Posts: 34
Joined: Mon Oct 22, 2007 6:22 pm
Location: Roswell, Ga.
Contact:

Re: Justfor the Heckofit

Postby Survivor Dave » Fri Nov 30, 2007 11:46 pm

heckdog wrote:Looks like the tool I used to turn my garbage disposal when I clog it full of that godforsaken FOUL food product potted meat.


HECKDOG is on the right track and very close! It can be used for that but it's not the primary function. A bonus from Zelph if you can guess the Make as well as the immediate use!

Skids, can you show me the "1/2" stove the grand prize winners get! :lol: :D :D :D :lol:

SD

User avatar
Pure Mahem
Posts: 447
Joined: Fri Sep 21, 2007 4:13 am

Re: Justfor the Heckofit

Postby Pure Mahem » Sat Dec 01, 2007 2:09 am

I'm guessing to remove the nut to the lint trap or catch all in the sink. Next guess would be to change the thing a ma bobbers inside the sink handles. Last but not least the tool that turns the water off and on to the men's urinals. :mrgreen:

I'm going with the make of Allen. but I would have a better guess if that duck tape weren't on there, lol! :mrgreen:
"Lad I don't know where you've been. But, I see you won first prize!"

heckdog
Posts: 40
Joined: Sun Nov 18, 2007 12:24 am

Re: Justfor the Heckofit

Postby heckdog » Sat Dec 01, 2007 12:59 pm

I still think it is an InSinkErator JamBuster Wrenchette designed specifically for getting Heine can pop tops unstuck in my disposal.

http://www.amazon.com/In-Sink-Erator-WR ... ome-garden

User avatar
Survivor Dave
Posts: 34
Joined: Mon Oct 22, 2007 6:22 pm
Location: Roswell, Ga.
Contact:

Re: Justfor the Heckofit

Postby Survivor Dave » Sat Dec 01, 2007 10:39 pm

heckdog wrote:I still think it is an InSinkErator JamBuster Wrenchette designed specifically for getting Heine can pop tops unstuck in my disposal.

http://www.amazon.com/In-Sink-Erator-WR ... ome-garden



OK heckdog, You da man! The tool is actually designed for 2 things. The first thing is that it fits into the disposer slot so you can screw it on to the sink flange, then the manual "unstucker" is secondary. I found it was easier to buy a new one instead of figuring out that after an hour, that a screwdriver would be better! I have never got the Jambuster/Torque wrench to work for anything except clutter the tool drawer.


Zelph give that man a cigar and half a stove!

SD


Return to “Mystery Tool - What is it??????”

Who is online

Users browsing this forum: No registered users and 1 guest