Mystery tool 17

A hand held tool or device, see if you can guess what it is.
User avatar
zelph
Posts: 15822
Joined: Tue Aug 14, 2007 1:53 pm

Mystery tool 17

Postby zelph » Thu Jan 10, 2008 11:41 am

Image
http://www.woodgaz-stove.com/

User avatar
Pure Mahem
Posts: 447
Joined: Fri Sep 21, 2007 4:13 am

Re: Mystery tool 17

Postby Pure Mahem » Thu Jan 10, 2008 12:58 pm

A Die tool for making the threads on bolts. :mrgreen:
"Lad I don't know where you've been. But, I see you won first prize!"

dzierzak
Posts: 14
Joined: Wed Sep 19, 2007 10:53 am
Location: West Virginia

Re: Mystery tool 17

Postby dzierzak » Thu Jan 10, 2008 1:39 pm

Take a seat... No, this may make a better fit.

No drips allowed...

ed

oops56
Posts: 1920
Joined: Wed Sep 19, 2007 11:31 am

Re: Mystery tool 17

Postby oops56 » Thu Jan 10, 2008 2:03 pm

dzierzak wrote:Take a seat... No, this may make a better fit.

No drips allowed...

ed


It makes new seats for faucet.
Man play with fire man get burnt

User avatar
zelph
Posts: 15822
Joined: Tue Aug 14, 2007 1:53 pm

Re: Mystery tool 17

Postby zelph » Wed Jan 16, 2008 6:26 pm

Hint Hint no winner yet.
http://www.woodgaz-stove.com/

User avatar
zelph
Posts: 15822
Joined: Tue Aug 14, 2007 1:53 pm

Re: Mystery tool 17

Postby zelph » Wed Jan 16, 2008 10:34 pm

Only a few more hours left ;)
http://www.woodgaz-stove.com/

User avatar
zelph
Posts: 15822
Joined: Tue Aug 14, 2007 1:53 pm

Re: Mystery tool 17

Postby zelph » Thu Jan 17, 2008 11:05 am

The correct name for this tool is Head Tube Reamer/Facing Tool. It's used by those who do their own bike repairs or building.

Proper frame preparation is very important. The HTR-1 combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1 comes complete with a 30.0mm reamer, and four different size pilots, (29.8mm, 30.0mm, 33.8mm, and 36.8mm). There are cases when a reamer is required to clean out or increase the diameter of the head tube. Most times however, facing of the head tube for good cup fit is the objective. In this case, reaming is not necessary and the pilots can be used in place of the reamers to keep the tool straight and create a faced head tube. The unique part of the HTR-1 is the quick-release, quick-adjust feature. The bottom portion can slide off and on easily without the long threading process. This portion of the tool can still be fine tuned while in use. The tapered centering cone unit rides on a bearing for extra smooth operation.

Image
http://www.woodgaz-stove.com/


Return to “Mystery Tool - What is it??????”

Who is online

Users browsing this forum: No registered users and 1 guest