I.V. Stove

Post your new stove ideas here! All stoves welcome.
User avatar
CajunHiker
Posts: 87
Joined: Mon Dec 10, 2007 1:45 pm

Re: I.V. Stove

Postby CajunHiker » Fri Dec 05, 2008 2:07 pm

I like it. Where does the piece after the valve come from?
Got a two burner setup yet?

User avatar
DarenN
Posts: 2816
Joined: Wed Feb 06, 2008 11:46 am
Location: Surrey, B.C. Canada

Re: I.V. Stove

Postby DarenN » Fri Dec 05, 2008 3:34 pm

CajunHiker wrote:I like it. Where does the piece after the valve come from?
Got a two burner setup yet?


the piece after the valve is the drip window. it's there so that i can count drips-per-mississippi's to control the flow rate. i made it from a syringe body.

Daren.......
"I'd rather be happy than right." Slartibartfast

User avatar
irrationalsolutions
Posts: 1450
Joined: Thu Sep 25, 2008 5:10 am
Location: South Carolina

Re: I.V. Stove

Postby irrationalsolutions » Fri Dec 05, 2008 8:29 pm

i like the idea and was thinking about trying something like it. do you mind if i do something similar with my own spin on it? i do not intend on selling it for profit, just for my personal use.
“Do or do not... there is NO try.” Yoda

Luke "Whats in (out) there?" Yoda "Only what you take with you."

Luke "I can’t believe it." Yoda "That is why you Fail.”

User avatar
DarenN
Posts: 2816
Joined: Wed Feb 06, 2008 11:46 am
Location: Surrey, B.C. Canada

Re: I.V. Stove

Postby DarenN » Fri Dec 05, 2008 9:25 pm

irrationalsolutions wrote:i like the idea and was thinking about trying something like it. do you mind if i do something similar with my own spin on it? i do not intend on selling it for profit, just for my personal use.


not at all. carry on forward. anything i do that i don't want to share i won't post in public. :mrgreen:

Daren........
"I'd rather be happy than right." Slartibartfast

User avatar
nj4x4fever
Posts: 8
Joined: Mon Dec 01, 2008 12:23 am
Location: New Jersey

Re: I.V. Stove

Postby nj4x4fever » Fri Dec 05, 2008 9:44 pm

What do you think of this idea, I bought this pump at Walmart for $5.00 bucks back in The Summer.
It Is a mist sprayer, this would be cool to use on a stove, right now I am using this as part of my water purification tests.
I fill this up with the water from a lake or pond then run it into my gravity fed water filter.
The valve is fully adjustable from a steady stream to a very fine mist.
I may have to scrap my idea using it for water purification in the name of science and try to use it on a alcohol stove.
I will get some fuel line from a RC Plane that is fire rated and see how well it works.

Image

Image

User avatar
seudo_411
Posts: 268
Joined: Sat Jun 14, 2008 4:32 pm
Location: South Africa
Contact:

Re: I.V. Stove

Postby seudo_411 » Tue Dec 09, 2008 5:46 pm

Look what i made as part of my remote canister my remote stove project. Its 1 of 3. only 2 more to go. the the soldering and other bits. But have a look at the pics and try name the original product and the tools used.
Image
Image
Image
Image

More on topic now. medical suppliers stock I.V bags that hold quantities down to about 250ml. But the minimum order is for 50 units. anybody want one :mrgreen:
Save space, Live on the edge...

Life might be a Bitch, but at least she knows who her Daddy is...

User avatar
lite hiker
Posts: 45
Joined: Wed Apr 30, 2008 5:40 pm
Location: Philadelphia

Re: I.V. Stove

Postby lite hiker » Tue Dec 09, 2008 6:04 pm

maybe how much are the bags

Vibe
Posts: 372
Joined: Mon Dec 01, 2008 5:28 pm
Location: Little Rock, AR.

Re: I.V. Stove

Postby Vibe » Tue Dec 09, 2008 7:09 pm

seudo_411 wrote: But have a look at the pics and try name the original product and the tools used.

CO2 cartridge? with the pierced portion center drilled out.
The opinion of 10,000 men is of no value if none of them know anything about the subject.
- Marcus Aurelius--------------------------------------------- Image

User avatar
seudo_411
Posts: 268
Joined: Sat Jun 14, 2008 4:32 pm
Location: South Africa
Contact:

Re: I.V. Stove

Postby seudo_411 » Wed Dec 10, 2008 3:52 pm

Ok an update on the I.V bags, to buy from the supplier you have to be a certified medical practitioner or service provider. "Is there a Doctor in the House". The burner cups are made from 8g nitrous capsules. Drilled out, and cut down by placing it in the chuck of a drill and holding a hack saw blade on it.

DarreN, what diameter tubing are you using. I would like to use about two to three of those capsules for the burner, all linked via copper tubing and if possible a pre heat tube. Gonna fill the caps with Tiki wick, or pre heat as i doubt it will work with both.
Save space, Live on the edge...

Life might be a Bitch, but at least she knows who her Daddy is...

User avatar
DarenN
Posts: 2816
Joined: Wed Feb 06, 2008 11:46 am
Location: Surrey, B.C. Canada

Re: I.V. Stove

Postby DarenN » Wed Dec 10, 2008 4:19 pm

the tubing i used is 3/16" ID. i would have liked 1/8, but couldn't get the valve to match.

Daren......
"I'd rather be happy than right." Slartibartfast


Return to “Homemade Stove Ideas”

Who is online

Users browsing this forum: No registered users and 2 guests