Globe Stove

Come check out a compilation of Zelph's stove designs.
User avatar
zelph
Posts: 15834
Joined: Tue Aug 14, 2007 1:53 pm

Re: Globe Stove

Post by zelph » Sat Oct 20, 2007 10:14 pm

Skidsteer wrote:Zelph I checked three K-Marts and two Wal-Marts this past week. Nary a globe in sight. I'll keep looking but it seems pretty grim out there.
Thanks for trying. I'll have to travel farther out and see what's up :D

Corporate office is about 60 miles from here, maybe Monday I'll swing over into that area and inquire.
http://www.woodgaz-stove.com/

User avatar
zelph
Posts: 15834
Joined: Tue Aug 14, 2007 1:53 pm

Re: Globe Stove

Post by zelph » Sun Oct 21, 2007 8:26 pm

I grilled the third steak today, used 4 briquettes and a globe with no holes, just the open bottom of my grill. I recommend using a piece of foil to wrap steak in and then use 2 tarp stakes to support it over the stove.

I took 16 min to cook to perfection :) Sarbar would be proud :D

View photos from bottom first.

Image shows how I used tarp stakes to support windscreen and pot. No holes required in stove, just use tarp stakes. Use the globe as your windscreen.

Image

Image

Image

Image only four pieces of charcoal

Image No holes in mesh



I then did a test of using a globe with no holes to burn wood twigs. I supported the globe with 2 tarp steaks(food on my mind :roll: )

It worked like a charm. I had to make 4 videos to show a complete cycle :D

http://www.youtube.com/watch?v=8wMfgO1AZ7s

http://www.youtube.com/watch?v=Zl0W8VylL0M

http://www.youtube.com/watch?v=AAPz0bdkUlM

http://www.youtube.com/watch?v=XPwapFQBW9k
http://www.woodgaz-stove.com/

User avatar
Skidsteer
Posts: 555
Joined: Fri Aug 17, 2007 2:10 pm
Location: Leisure Acres

Re: Globe Stove

Post by Skidsteer » Sun Oct 21, 2007 10:04 pm

My guess is you've started a fire or two in your time. :mrgreen:
Skids

Insanity: doing the same thing over and over again and expecting different results.
Albert Einstein, (attributed)
Image

oops56
Posts: 1920
Joined: Wed Sep 19, 2007 11:31 am

Re: Globe Stove

Post by oops56 » Sun Oct 21, 2007 10:18 pm

Does it make much soot that way.Also me and zelph need a program to put together more then one movie to make one is there a free one that can be downloaded off the web
Man play with fire man get burnt

Nightwalker
Posts: 38
Joined: Thu Sep 20, 2007 1:47 am

Re: Globe Stove

Post by Nightwalker » Mon Oct 22, 2007 12:41 am

oops56 wrote:Does it make much soot that way.Also me and zelph need a program to put together more then one movie to make one is there a free one that can be downloaded off the web
Try the ZS4 Video Editor
Just Hike!

User avatar
zelph
Posts: 15834
Joined: Tue Aug 14, 2007 1:53 pm

Re: Globe Stove

Post by zelph » Mon Oct 22, 2007 12:30 pm

by Skidsteer on Sun Oct 21, 2007 10:04 pm

My guess is you've started a fire or two in your time.
HeeHee!!! One or two, I have some stories but my kids might be watching this site :mrgreen

------------------------------------------------------------------------------------------------------------
by oops56 on Sun Oct 21, 2007 10:18 pm

Does it make much soot that way.Also me and zelph need a program to put together more then one movie to make one is there a free one that can be downloaded off the web
The wood burner needs oxygen, lots of it, more is better. The wood that you use should be driest you can find, size of twigs no bigger than your pinky finger, don't be in a hurry to put more wood on you'll cut of the oxygen. Let it get goin good before adding more wood.
Enjoy the little campfire :D You need oak, maple, hickory for long burning fuel. Practice before going out on a trek.


--------------------------------------------------------------------------------------------------------------
by Nightwalker on Mon Oct 22, 2007 12:41 am

Try the ZS4 Video Editor
Thank You for that link Nightwalker, now if I can only figure out how to use it :D

-------------------------------------------------------------------------------------------------------------

I found out yesterday that I had two different size globes. The difference is in their height. My most recent purchase is 5/8" shorter than the original. The third steak was grilled on the shorter one.

Image
http://www.woodgaz-stove.com/

oops56
Posts: 1920
Joined: Wed Sep 19, 2007 11:31 am

Re: Globe Stove

Post by oops56 » Mon Oct 22, 2007 2:23 pm

Yep i got the movie editor too but not got it to work gave up for now.I went to the forum cant find anything there to help me.
Man play with fire man get burnt

Nightwalker
Posts: 38
Joined: Thu Sep 20, 2007 1:47 am

Re: Globe Stove

Post by Nightwalker » Mon Oct 22, 2007 7:24 pm

oops56 wrote:Yep i got the movie editor too but not got it to work gave up for now.I went to the forum cant find anything there to help me.
http://www.zs4.net/tutorials
Just Hike!

Nightwalker
Posts: 38
Joined: Thu Sep 20, 2007 1:47 am

Re: Globe Stove

Post by Nightwalker » Mon Oct 22, 2007 8:12 pm

And here's the manual. :)
Just Hike!

User avatar
Skidsteer
Posts: 555
Joined: Fri Aug 17, 2007 2:10 pm
Location: Leisure Acres

Re: Globe Stove

Post by Skidsteer » Mon Oct 22, 2007 9:38 pm

oops56 wrote:Does it make much soot that way.Also me and zelph need a program to put together more then one movie to make one is there a free one that can be downloaded off the web
If you have Windows movie maker you can import the different movies, edit and upload....or...

Upload the movies as clips to jumpcut and save them as a set as they're uploading. Then make a movie from the set. Free and no file size limit(yet). You can also edit online with Jumpcut.

One thing you apparently can't do is directly post photos from jumpcut to a bulletin board. I've been going crazy trying to figure a way but no dice. If anybody knows how to do it, help a brotha out. :oops:
Skids

Insanity: doing the same thing over and over again and expecting different results.
Albert Einstein, (attributed)
Image

Post Reply