Titanium Cone and Toaks 550 pot

Come check out a compilation of Zelph's stove designs.
User avatar
zelph
Posts: 15744
Joined: Tue Aug 14, 2007 1:53 pm

Titanium Cone and Toaks 550 pot

Postby zelph » Wed Mar 09, 2016 12:02 am

Coming this year will be a kit containing a Caldera Cone/Toaks 550 pot, StarLyte burner and Brian Green Esbit Burner (BGET)

Cone will fit horizontal inside pot.

Photo is a prototype made 2 years ago for someone at backpackinglight.com
Attachments
toaks550and C cone 001.JPG
DeGraaf pot.JPG
"Nothing Ventured Nothing Gained" stove store = http://www.woodgaz-stove.com/

User avatar
zelph
Posts: 15744
Joined: Tue Aug 14, 2007 1:53 pm

Re: Titanium Cone and Toaks 550 pot

Postby zelph » Sun Mar 13, 2016 12:46 pm

More photos
Attachments
toaks55and TDcone 019.JPG
toaks55and TDcone 008.JPG
"Nothing Ventured Nothing Gained" stove store = http://www.woodgaz-stove.com/

stormin'
Posts: 7
Joined: Tue Dec 22, 2015 3:45 am

Re: Titanium Cone and Toaks 550 pot

Postby stormin' » Sun Mar 13, 2016 3:24 pm

Hi Zelph,any idea when this setup will be ready to buy?

User avatar
zelph
Posts: 15744
Joined: Tue Aug 14, 2007 1:53 pm

Re: Titanium Cone and Toaks 550 pot

Postby zelph » Sun Mar 13, 2016 9:48 pm

At the end of this coming week. I only have 9 kits to make available. I think most of them are already have a name attached to them because I announced this new kit over at backpackinglight.com There was a thread over there that inspired the creation of putting a ridgeline on a titanium pot.

I thought the kit would make for a nice compact, multi fuel companion for use by one person.
"Nothing Ventured Nothing Gained" stove store = http://www.woodgaz-stove.com/

stormin'
Posts: 7
Joined: Tue Dec 22, 2015 3:45 am

Re: Titanium Cone and Toaks 550 pot

Postby stormin' » Mon Mar 14, 2016 3:41 pm

What is the aim of the ridgeline in the pot? Is it mainly for weight reduction/one piece cone.There is still a lot of pot exposure to cooling air, where a two part cone would cover the entire pot.
IMG_20160219_153105.jpg

User avatar
zelph
Posts: 15744
Joined: Tue Aug 14, 2007 1:53 pm

Re: Titanium Cone and Toaks 550 pot

Postby zelph » Tue Mar 15, 2016 4:22 pm

I mainly see it for compactness.

Because hot air is rising continuously up the sides of the pot, there is no heat loss unless it's windy instead of just breezy. Let's say the penalty of heat loss is about the same amount of fuel folks use for "priming" their stoves if they have that type. One example is the 12-10 stove furnished by Trail Designs. Or the presurized ones by minibulldesigns.

Yes, there are penalties for lightweight and compactness :mrgreen:

It's about "preference" I like "simple" the KISS principle applies ;)

Looking at your windscreen tells me after a 1 years worth of use it's going to look kind of dog-eared if I were to use it. Assembling it time and time again will take it's toll. Now that's me doing the assembly ;)

Nowa-days, we see people saying they want to do away with warm meals/drinks in favor of energy bars. They don't have the time to heat a meal :roll:
"Nothing Ventured Nothing Gained" stove store = http://www.woodgaz-stove.com/

User avatar
zelph
Posts: 15744
Joined: Tue Aug 14, 2007 1:53 pm

Re: Titanium Cone and Toaks 550 pot

Postby zelph » Sat Apr 02, 2016 6:20 pm

I'll have some kits ready on Monday.
"Nothing Ventured Nothing Gained" stove store = http://www.woodgaz-stove.com/

User avatar
cadyak
Posts: 452
Joined: Mon Dec 14, 2009 5:53 pm
Location: albany,ga

Re: Titanium Cone and Toaks 550 pot

Postby cadyak » Mon Apr 04, 2016 4:49 pm

Are you making multiple sizes? (as in pot sizes)
thanks. I like the kit. It doesnt need that huge hole for the handles

User avatar
zelph
Posts: 15744
Joined: Tue Aug 14, 2007 1:53 pm

Re: Titanium Cone and Toaks 550 pot

Postby zelph » Mon Apr 04, 2016 11:37 pm

I'm going to do it with the 600 with handles. I found out by accident(keen observation/thinking ;)) that one handle can be removed and the remaining one can be squeezed and it will act as a pot grabber that will allow picking up the pot and pour water into a bowl/Ziploc etc Each handle weighs 9 grams. The toaks 600 allows 2 cups volume of water with 1/2" headroom so water will not boil over rim of pot. I like the 600 for my needs. Many can get by with just the 550.

I have a straight wall windscreen/pot support in the works for the use with esbit only. I'm finalizing the closure on it, Should be ready in a week or so.
"Nothing Ventured Nothing Gained" stove store = http://www.woodgaz-stove.com/

User avatar
zelph
Posts: 15744
Joined: Tue Aug 14, 2007 1:53 pm

Re: Titanium Cone and Toaks 550 pot

Postby zelph » Wed May 04, 2016 11:28 am

There was a need at BPL for a Toaks550 with handles so I succumbed :mrgreen:


Pot with lid weighs 69 gr – 2.4oz (lid weighs 16gr – 0.5oz)

Starlyte Burner with lid 16gr – 0.5oz

BGET with alum. storage container 10gr – 0.4oz

Caldera Cone with sleeve 17gr – 0.6oz

Mesh Storage Sack 11gr – 0.4oz

https://backpackinglight.com/forums/top ... h-handles/
Attachments
toaks with handles.JPG
"Nothing Ventured Nothing Gained" stove store = http://www.woodgaz-stove.com/


Return to “Zelph's Stoveworks Factory”

Who is online

Users browsing this forum: No registered users and 4 guests