Looking for a particular thread...

Questions or comments about hiking in general? Post them here!
Post Reply
User avatar
shingaling
Posts: 67
Joined: Wed Apr 07, 2010 9:30 pm
Location: Hamilton, Ontario, Canada

Looking for a particular thread...

Post by shingaling » Sat Jan 01, 2011 11:16 am

Happy New Year all!
I'm looking for a thread I saw somewhere on here about a stove with a central hole that allows air to come up from below, through the center. I've searched for a while, but can't remember the name of the stove, or the name for that kind of stove in general.

The reason I ask is that I came across an old aluminum canning funnel in a thrift store, the kind with interchangeable funnel hole sizes. The funnel 'tip' sandwiches between the bowl of the funnel and a locking nut. I want to invert the tip so that it sticks up into the bowl, and silicone the heck out of the locking ring. There's enough rim surface that a seal should be possible.

Thanks, Shingaling

p.s. What ever happened to all of Q_x's posts? He had some good topics, and asked a lot of questions. Input like that is important to a DIY place like this!
Any road followed precisely to its end leads precisely nowhere. Climb the mountain just a little bit to test that it's a mountain. From the top of the mountain, you cannot see the mountain.

User avatar
DarenN
Posts: 2816
Joined: Wed Feb 06, 2008 11:46 am
Location: Surrey, B.C. Canada

Re: Looking for a particular thread...

Post by DarenN » Sat Jan 01, 2011 11:55 am

is this the one you are looking for?

viewtopic.php?f=43&t=3669&p=25465&hilit ... ner#p25465

....
"I'd rather be happy than right." Slartibartfast

User avatar
zelph
Posts: 15834
Joined: Tue Aug 14, 2007 1:53 pm

Re: Looking for a particular thread...

Post by zelph » Sat Jan 01, 2011 12:36 pm

Happy New Year to you also. May it be more delightful than the last. :D

Maybe this is the one:

viewtopic.php?f=2&t=4&p=4&hilit=dual+flame+burner#p4

Here is one made of solid aluminum by Tony in Australia:

viewtopic.php?f=2&t=427
p.s. What ever happened to all of Q_x's posts?
I think they are still here. He said he would not be coming back for personal reasons.
http://www.woodgaz-stove.com/

User avatar
ConnieD
Posts: 2043
Joined: Sat Dec 19, 2009 10:53 pm
Location: Montana
Contact:

Re: Looking for a particular thread...

Post by ConnieD » Sat Jan 01, 2011 1:08 pm

I miss him, too.

I thought he wasn't posting, because he solved the soot problem that had been the initial problem he was concerned about.

And, Happy New Year!

Post Reply