Using Heat to cure JB welds

Always good to have some helpful tips when making stove.
Where to get materials cheap, what tool is best.
How to do a specific task. Anything that will help.
User avatar
zelph
Posts: 15822
Joined: Tue Aug 14, 2007 1:53 pm

Using Heat to cure JB welds

Postby zelph » Wed Sep 26, 2007 6:08 pm

Here is a quote from a post that oops56 made on another thread. good tip on using heat to cure JB welds.

I tried it and it works well. I took a photo of the set-up, I'll post later.

Zelph i got 3 almost like yours. The one on the right is in a cage that was tea light holder cut away not need put a can cover on top. I use it when i jb weld things fire it up put what that is got weld when it feel hot its cured take off let cool it only takes about a min. to cure it on stove then one or two to cool off.
Image
P. S. in cold wheather when in shop fire it up put coffee cup on it keep it hot neet little heater
http://www.woodgaz-stove.com/

User avatar
zelph
Posts: 15822
Joined: Tue Aug 14, 2007 1:53 pm

Re: Using Heat to cure JB welds

Postby zelph » Wed Sep 26, 2007 6:18 pm

Here are the photos of the set-up I used and the weld:

Image

Image
http://www.woodgaz-stove.com/


Return to “Stove Making Tips”

Who is online

Users browsing this forum: No registered users and 2 guests