Mystery Tool 65

A hand held tool or device, see if you can guess what it is.
User avatar
zelph
Posts: 15832
Joined: Tue Aug 14, 2007 1:53 pm

Mystery Tool 65

Post by zelph » Mon Mar 16, 2009 7:21 pm

both ends of the tool look the same


Image
http://www.woodgaz-stove.com/

User avatar
DarenN
Posts: 2816
Joined: Wed Feb 06, 2008 11:46 am
Location: Surrey, B.C. Canada

Re: Mystery Tool 65

Post by DarenN » Mon Mar 16, 2009 7:34 pm

it's a hole saw. as it is the same on both ends i suspect it is a hand tool.

Daren......
"I'd rather be happy than right." Slartibartfast

beemerphill
Posts: 90
Joined: Sun Feb 17, 2008 12:46 pm

Re: Mystery Tool 65

Post by beemerphill » Mon Mar 16, 2009 7:58 pm

It probably is a hole saw, but my first guess would be a plug cutter.

realityguy
Posts: 5948
Joined: Tue Feb 24, 2009 2:20 am
Location: slightly north of Seattle,WA

Re: Mystery Tool 65

Post by realityguy » Mon Mar 16, 2009 8:08 pm

I'd say a core sample borer or bit...That way they can push them out the back end,reverse it if it gets dull..
The views and opinions expressed by this person are his own and not the general consensus of others on this website.Realityguy

Irvingdog
Posts: 104
Joined: Mon Jul 28, 2008 9:30 pm

Re: Mystery Tool 65

Post by Irvingdog » Mon Mar 16, 2009 9:58 pm

I saw one of those at my Proctologist's office, but, I can't remember the name of it, so, I guess I'm out.

irrationalsolutions
Posts: 1450
Joined: Thu Sep 25, 2008 5:10 am
Location: South Carolina

Re: Mystery Tool 65

Post by irrationalsolutions » Mon Mar 16, 2009 11:40 pm

i would guess its used to cut materials like leather or gaskets.
“Do or do not... there is NO try.” Yoda

Luke "Whats in (out) there?" Yoda "Only what you take with you."

Luke "I can’t believe it." Yoda "That is why you Fail.”

Roy
Posts: 32
Joined: Mon Apr 21, 2008 7:24 pm

Re: Mystery Tool 65

Post by Roy » Tue Mar 17, 2009 10:07 am

Interesting that the teeth don't appear to be sharpened and that, if it was a holesaw, it would need to be rotated counter-clockwise. Could it be some sort of coupling?

User avatar
zelph
Posts: 15832
Joined: Tue Aug 14, 2007 1:53 pm

Re: Mystery Tool 65

Post by zelph » Tue Mar 17, 2009 1:24 pm

Irvingdog wrote:I saw one of those at my Proctologist's office, but, I can't remember the name of it, so, I guess I'm out.
:lol: :lol: :lol: When was the last time you were at your Proctologist's office?????? Were you violated by one of these tools????? :lol: :lol:
http://www.woodgaz-stove.com/

User avatar
zelph
Posts: 15832
Joined: Tue Aug 14, 2007 1:53 pm

Re: Mystery Tool 65

Post by zelph » Fri Mar 20, 2009 10:35 am

zelph wrote:both ends of the tool look the same


Image
It's a wood screw "extractor".

Remember how "slotted" brass screws were so hard to remove without stripping the slot, I do :D

Roy was alert to see that the teeth are left hand.
http://www.woodgaz-stove.com/

realityguy
Posts: 5948
Joined: Tue Feb 24, 2009 2:20 am
Location: slightly north of Seattle,WA

Re: Mystery Tool 65

Post by realityguy » Fri Mar 20, 2009 1:14 pm

zelph wrote:
Irvingdog wrote:I saw one of those at my Proctologist's office, but, I can't remember the name of it, so, I guess I'm out.
:lol: :lol: :lol: When was the last time you were at your Proctologist's office?????? Were you violated by one of these tools????? :lol: :lol:
That's not fair!Appears the protologists get ALL the good tools these days! :cry:
The views and opinions expressed by this person are his own and not the general consensus of others on this website.Realityguy

Post Reply