Failure turned into a Success!!!

Post your new stove ideas here! All stoves welcome.
User avatar
DarenN
Posts: 2816
Joined: Wed Feb 06, 2008 11:46 am
Location: Surrey, B.C. Canada

Re: Failure!

Postby DarenN » Sun May 11, 2008 4:59 pm

the potstand. it's a bit small for a larger pot but it fits the Heiney like a glove.
Image

hanging by a thread. ;) three feet off the floor.
Image

:D :D :D ..........
"I'd rather be happy than right." Slartibartfast

User avatar
zelph
Posts: 15822
Joined: Tue Aug 14, 2007 1:53 pm

Re: Failure!

Postby zelph » Sun May 11, 2008 10:05 pm

Wee knew you could do it, whooo!!!!

Hanging by a thread, it reminds me of a Mountaineering stove. Hanging type. :mrgreen:
http://www.woodgaz-stove.com/

oops56
Posts: 1920
Joined: Wed Sep 19, 2007 11:31 am

Re: Failure!

Postby oops56 » Mon May 12, 2008 2:48 am

Thanks Darern for the idea i got one failure and a good one later make a good video one put on u tube i give you credit for it.Testing is done it needs prime wick on top to help it the inner wall is to thick.First test water 16 oz. 55F 1/2 oz. fuel boil 5 min burn time 7-1/2 min. flame to pot 1 in.
Test 2 16 oz water 55F 1/2 oz. fuel boil 6 min. burn time10 min. flame to pot 3/4 in.

Image
Last edited by oops56 on Mon May 12, 2008 8:59 am, edited 1 time in total.
Man play with fire man get burnt

User avatar
zelph
Posts: 15822
Joined: Tue Aug 14, 2007 1:53 pm

Re: Failure!

Postby zelph » Mon May 12, 2008 8:57 am

Looks good oops, nice flame patern. Does the cap seal leakproof?
http://www.woodgaz-stove.com/

oops56
Posts: 1920
Joined: Wed Sep 19, 2007 11:31 am

Re: Failure!

Postby oops56 » Mon May 12, 2008 9:00 am

zelph wrote:Looks good oops, nice flame patern. Does the cap seal leakproof?


not yet got a idea later
Man play with fire man get burnt

oops56
Posts: 1920
Joined: Wed Sep 19, 2007 11:31 am

Re: Failure!

Postby oops56 » Mon May 12, 2008 12:02 pm

I did it :D :D I made a gasket for the jolt.Fist i had some cork gasket with rubber it in water to get soft took gasket out of water put in cover mold to fit but was to hard to turn on plus it leak.Then just as i was to give up i saw my alm. foil the light came on.Two layers on top and leave the gasket thats in the cover screw on tear of extra no leaks. :D :D

Image
Man play with fire man get burnt

User avatar
zelph
Posts: 15822
Joined: Tue Aug 14, 2007 1:53 pm

Re: Failure!

Postby zelph » Mon May 12, 2008 12:09 pm

Whooowhoo!!!! way to go oops. DIY trangias :) Nice way to come up with a workable trangia. I like how the lid has the built-in primer resevior. First Ridgerunner, then Daren and now you. What a team :)
http://www.woodgaz-stove.com/

User avatar
DarenN
Posts: 2816
Joined: Wed Feb 06, 2008 11:46 am
Location: Surrey, B.C. Canada

Re: Failure!

Postby DarenN » Mon May 12, 2008 5:37 pm

as of NOW, the cap seals up tight, and it has a simmerring attachment that is adjustable!! :D :D

Daren.......
"I'd rather be happy than right." Slartibartfast

User avatar
DarenN
Posts: 2816
Joined: Wed Feb 06, 2008 11:46 am
Location: Surrey, B.C. Canada

Re: Failure!

Postby DarenN » Mon May 12, 2008 5:39 pm

zelph wrote:Whooowhoo!!!! way to go oops. DIY trangias :) Nice way to come up with a workable trangia. I like how the lid has the built-in primer resevior. First Ridgerunner, then Daren and now you. What a team :)


so where's yours Zelphie ole boy?!? :mrgreen:
"I'd rather be happy than right." Slartibartfast

User avatar
zelph
Posts: 15822
Joined: Tue Aug 14, 2007 1:53 pm

Re: Failure!

Postby zelph » Mon May 12, 2008 5:42 pm

Mine is on the back burner. I have parts but not enough time :D

Still have the coil burner on hold also
http://www.woodgaz-stove.com/


Return to “Homemade Stove Ideas”

Who is online

Users browsing this forum: No registered users and 0 guests